How To Make Money By Just Liking Facebook Pages and subscribing t YouTube channels.

What if I said:
"Like that page, watch that video or follow
that person and get paid for it!"

Is this real life lol? Yes it is!

Make money from Facebook twitter Google+ & YouTube 

1) How to make money, get more fans/followers or views?

Prohits is a page with which to make money by:

-Likes of Facebook

-Fans Facebook

- +1 On Google +,

-follow on twitter and get followers

-watch YouTube videos and make them viral.

For everything you get "1 coin" to your balance (value of 1 coin is 0.01$.)

2) How do I get paid?

The minimum cash out is 0.50 $ and can be withdraw via PayPal. Earn money over internet it's so easy!

3) Does it have referral system?

Ofcourse like every online money making website it has a level of referrals (direct referrals) of the
   25 Points which we credited for being active and also 20% of the generating
  for life.

The number of direct referrals is unlimited.

                      1000 Points = 1$

USE Coupon Code And Get Instant 50 Coins : "Rising-Prohits"

                       PAYMENT PROOF :-

Top 4 Methods To Remove Write Protection From Your Pen Drives / Memory Sticks

In most of the USB based flash/pen drives, write protection is provided via the small notch. First of all look for it in sides of your drive. It’s even marked with lock/unlock symbol. Move/slide the notch to unlock position (means releasing write protection) before you perform any file operations in your drive such as copy/paste/format etc. After that you can slide back the notch to lock position safely.

But many of the pen drives don’t provide hardware lock/notch for write protection. Instead they back it up by means of some software/tool. From there you can change the write protection lock/unlock option. Refer to your pen drive’s manual for more details in this regard as different pendrive have diferent ways to to unlock them or otherwise you can also take help of some tools to unlock them.

Best Methods To Remove Write Protection From Your Memory Sticks / Pen Drives Goes here (ENJOY AND POST FEEDBACKS TOO)

METHOD #1
Open Registry editor of your PC
For this you should type command “regedit” on run.
Successively navigate to following linkHKEY_LOCAL_MACHINE\SYSTEM\Currentcontrolset\control\storatedevicepolicies( Note: if you can’t find “ storatedevicepolicies ” after “control” folder then you need to create it. For that follow instructions       mentioned below )
Open a new note pad file.
Copy this
cd\reg add “HKLM\System\CurrentControlSet\Control\StorageDevicePolicies” /t Reg_dword /v
WriteProtect /f /d 0
save it as DISABLEWP.BAT
Then copy it to start up folder.
In right side u will be getting writeprotect option, just right click that and modify the hexadecimal value from 1 to 0
Restart your PC and enjoy!!!!
( Still having problem???   Don’t worry try other methods below )

============================================================================================
METHOD #2

If you have transcend pen drive infected by 9u.exe which is a write protect virus then the following works like a charm:
1) Download JetFlash online recovery from:
www.transcendusa.com/Support/DLCenter/Software/OnLineRecovery.exe
2) Run the program
3) Specify the capacity of your drive eg.512 MB, 1 GB …..etc
4) Choose “repair and erase all data” OR ” repair and keep existing data”
5) Progress bar starts…….completes
6) Notification appears —” format complete”
7) Unplug and plug your drive and …..presto

enjoy!!!!

( Still having problem ?   Don’t worry try other methods below )

============================================================================================

Method #3

1. Start > Run  -> type “CMD” and press enter
2. type< diskpart
3. type< list volume
4. type< select volume # (# is the number of the USB HDD you’ve pluged in)
5. type< attributes disk clear readonly

(If you need help while typing commands then type “HELP FORMAT” on command prompt)
============================================================================================

METHOD #4

There are a series of options in the Group Policy Object Editor that deal with read/write permissions on hard drives and removable media.  I basically changed their individual settings from “Not configured” to “Disabled”.

Start -> Run… -> gpedit.msc -> OK
Computer Configuration -> Administrative Templates -> System -> Removable Storage Access

In here I disabled all of the “Deny read access/write access” options; you may only want to disable the ones relating directly to the type of media that you want to access.

Here are the ones I changed:

Removable Disks:  Deny execute access
Removable Disks:  Deny read access
Removable Disks:  Deny write access

Double-click each one and select the ‘Disabled‘ radio button.

Do the same as above, except the first step is “User Configuration” instead of “Computer Configuration“

(Best result if you try both method #1 and method #4 together)

Enjoy!!!

All the methods mentioned are tested and they works well in my PC.

Please don’t forget to leave your feedbacks below as comment and lets discuss if more tricks are needed…

Thanks and Regards
HackerzTAG

How to Add Discussion Forum Into your Blogger

Friends, Now i share a information about add a discussion forum into your Blogger. Blogger has no any feature to add forum directly. Because of this reason we cant  discuss anything with our customers/visitors. Now i share a trick to add forum directly into your blogger pages.You can add edit, comment anything, in this forum. It make a professional look and it also provide good contact with your visitors.  Just follow this post and install it.

· Go to nabble.com and register .

· An activation link will be sent to your Email inbox. Check your email.

· Click this link to activate your account and be able to use other features.

· Click on Options and Select Embedding options

· Now its redirect to another page. Copy given code.

· Then Go to your Blogger dashboard.

· Create a New Page.

· Paste the copied code into the Edit HTML mode section (NOT in the compose mode).

· Publish the page and view it.

· Your forum is ready.

· If you want to restructure your forum, Go back to Nabble and log in with your e mail and password..

How to use the Scannow SFC tool in Windows XP (Without CD-ROM)

Windows XP has the ability to protect itself from system instability caused by 3rd party software overwriting important system files.

This used to be (and still is in fact), a problem with Windows 95 and Windows 98.

With the introduction of Windows Millennium Edition, Microsoft made a real effort to stop this from happening.

Now in Windows XP we have a much more refined protection of these important files...

This system is called:

Windows File Protection

By default, Windows File Protection is always enabled and allows Windows
digitally signed files to replace existing files safely. Currently, signed files are distributed
through:

# Windows Service Packs

# Hotfix distributions

# Operating system upgrades

# Windows Update

# Windows Device Manager

If you introduce a file replacement in any other way, Windows File protection will overwrite your file!
An important part of Windows File Protection is the command line utility:

System File Checker (sfc.exe)
You will often see references to scannow sfc in online newsgroups etc. This is a great tool for troubleshooting Windows XP problems.

 How to use Scannow sfc...
The main reason for using this utility is when you suspect there may be a problem with a Windows XP system file.

Perhaps you get a dialog box appear informing you of a problem with a .dll file, or your program will just not load! It is therefore worth checking to see if there are any corrupt system files using scannow sfc.

To do this simply go to the Run box on the Start Menu and type in:

sfc /scannow

This command will immediately initiate the Windows File Protection service to scan all protected files and verify their integrity, replacing any files with which it finds a problem.

In an ideal world that would be the end of the story... Any corrupt, missing or incorrect files would be replaced by this process.

However, things can go wrong and the following guide should help!

The #1 complaint with scannow sfc is that is sometimes asks for the original installation disc for Windows XP.

Why does this Happen?

Well, in your computer's registry, are several settings that are checked when you run scannow sfc.

As mentioned earlier in this article, the Windows File Protection service constantly monitors for any changes to the main system files. Well Windows XP keeps a cache (copy) of these essential files at the following location:

C:WINDOWS\System32\Dllcache (assuming C: is your system root which it probably is.)

NB - The dllcache folder is extremely important so Windows XP hides it from you! To view it go to: My Computer > Tools > Folder Options > View > "uncheck" Hide protected operating system files.

If that's the case on your computer then there is normally no need for the original XP CD to be inserted as your computer has a "copy" it can get hold of in this cache...

But, if the Dllcache folder, or part of it, has become corrupted for some reason then you will be prompted for the XP CD - so your computer can get a clean copy!

Having said that not ALL installations of Windows XP have ALL the system files cached into this folder! You may only have around 50MB of files in this folder under Windows XP depending on the quota settings in the registry. (Under Windows 2003 Server the default is 300MB of system files!)

Annoying, YES!

Is there a workaround YES!

As well as having a cache of all the system files on your PC, I like to have the I386 folder from the XP CD installed on the computer as well. After doing this I then modify the registry to tell it the source path for these files... Why? Well not only does this prevent 99% of request for the the XP CD with Windows File Protection. But the I386 folder also contains many other files that are sometimes needed by the operating system and this stops those requests for the XP CD too!

NB - With today's large hard drives (like windows best web hosting server) you are not going to notice this 475 MB folder on your computer, but older systems may not have the space for this... Having said that not ALL installations of Windows XP have ALL the system files cached into this folder! You may only have around 50MB of files in this folder under Windows XP depending on the quota settings in the registry. (Under Windows 2003 Server the default is 300MB of system files! Use to be in cheap web hosting servers as well)

Step 1

You will need to get your XP CD and locate the folder called:

I386

This is a major folder and should be one of the first you see, now copy this onto your hard drive into the system root. For most of you that is going to be C:\ so you should end up with a folder that looks like: C:\I386

-----------------------------

Step 2

Now you will need to tell your computer you now have the files on your PC. We do this is the registry (type regedit in the Run box on the start menu) by navigating to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

You will see various entries here on the right hand side. The one we want is called:

SourcePath

It probably has an entry pointing to your CD-ROM drive, and that is why it is asking for the XP CD. All we need to do is change it to:

C:\

Simply double click the SourcePatch setting and a new box will pop up allowing you to make the change.

Now restart your computer and try scannow sfc again!

------------------------------

Other Problems with scannow sfc...

#1

Has the CD Drive's drive letter changed (perhaps by the addition of another hard drive, partition, or removable drive) since Windows XP was first installed? If so, simply edit the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Setup\SourcePath to reflect the changed drive letter.

After you restart the computer, WFP and sfc /scannow uses the new source path instead of prompting for the Windows XP installation CD-ROM

#2

Has the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Setup\SourcePath got an incorrect entry? The SourcePath entry does NOT include the path location till the I386 folder. It completes one folder ahead to reach the I386 folder.

Example:

If the I386 directory is at C:\I386, the SourcePath value would be C:\

#3

If the problem persists and you have the correct path for your I386 folder then the I386 folder is corrupted. To solve this problem copy I386 folder from the CD-ROM to your system restart the system and then
perform sfc /scannow again.

#4

You do not have an XP retail CD with an I386 folder on it. If you have a restore CD from your PC manufacturer then you may have to explore the CD to find the folder.

#5

You still keep being prompted for the XP CD yet you have done all in this article! There is another setting in the registry that may be causing the problem. Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SourcePath

Make sure the entry here is the same path to the I386 folder as used above.

#6

Systems administrators can enforce security policies that may include changes to the Windows File Protection settings. You will need to speak with your network administrator about this, but it is important to bear in mind when Windows starts up, the Windows File Protection service synchronizes (copies) the WFP settings from the following registry key:

HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File Protection

to the following registry key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

Therefore, if any of the following values are present in the HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File Protection key, they will take precedence over the same values under the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon key.

This will not effect scannow sfc so much, but WILL make an impact if any of the other sfc.exe "switches" have been used! (More about these at the end of this article.)

#7

When you run scannow at logon you do not get a progress bar... This can easily be remedied by adding a new DWORD: SFCShowProgress to the registry key:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

the values available are: 0 = disabled, 1 = enabled

------------------------------------

What about Windows Updates....

You may be asking yourself how does sfc.exe know how to check for updated Windows system files? Well during OS upgrades, service pack installations etc.. the dllcache folder should be updated with these new files.

As an example the recent Windows XP Hotfix - KB828035 updated the system file wkssvc.dll A new version of the file was placed in C:\WINDOWS\system32 and a copy in the cache: C:\WINDOWS\system32\dllcache A copy of the old system file is archived in: C:\WINDOWS\$NtUninstallKB828035$

There is another location the Windows File protection service uses and that is the I386 folder in C:\WINDOWS\ServicePackFiles When you install a service pack, like SP1. Any new system drivers are cached in this location too.

If you have odd problems with running scannow sfc and nothing else in the article has resolved it, then take a look at the entry in:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\
CurrentVersion\Setup\ServicePackSourcePath

This should be pointing to the location C:\WINDOWS\ServicePackFiles (assuming C:\ is the boot drive.)

-------------------------------------------------------

For those of you who are familiar with sfc.exe under Windows 2000 professional. It is worth noting that the following two options are NOT available under Windows XP.

These are:

sfc /cancel - In Windows 2000, this command immediately cancels all pending scans of protected system files. This option has no effect in Windows XP.

sfc /quiet - In Windows 2000 this sets Windows File Protection to replace any incorrect system files detected with the appropriate version from the dll cache without any user notification. This option has no effect in Windows XP.

Thanks for reading this article on scannow sfc.

Internet Download Manager Register Manually without using any ones activator

Internet Download Manager (idm)  

Hello Friends, today i am going to explain how to patch Internet Download Manager (IDM) manually. Using this hack you can register the Internet Download Manager (IDM) for free using you own credentials i.e register on your Name and email ID. I am explaining the manual method because most of my users said that patch and keygen contain viruses.

How to Make Your Own Facebook Smileys [Tutorial]

Hello All..
Today I'll tell you how to make your own Facebook smileys ,
this is the same as "How to post images in chat" :D
Its quite simple ..

Prevent cut, paste, copy, delete, re-naming of files & folders.

Prevent v 1.0, a freeware app which runs on all Windows. If you don’t want anyone deleting or renaming or messing around with your data, maybe your younger sibling, then Prevent may be able to help you.

The downloaded zip file consists of:
1. Prevent.exe
2. Pre_1
3. Pre_2
4. Read Me file.
5. Uninstall

Run the Prevent installer setup. The installer only places the Prevent folder in the system Program Files folder. A desktop shortcut will also be created. To run the program, click on Prevent. Set your Hot key to stop Prevent. You may set it as Ctrl+P if you wish. Hotkeys Win+F8 kills Pre_1 and Win+F9 kills Pre_2, too. But the single hotkey set by you will kill all Prevent processes at the same time.

Prevent :
1. Stops Cut
2. Stops Paste
3. Stops Copy
4. Stops Delete
5. Stops Copy To
6. Stops Move to
7. Stops Send To
8. Prevents renaming
9. Disables Task Manager’s End Process button. Alsoit doesn’t allow you to right click on process name and click on end process. It also grays out the context menu items, disable Ctrl+C, Ctrl+X and Ctrl+V and/or stops the process.

To uninstall or remove Prevent, use the Uninstaller situated in the Prevent folder, or uninstall it via the Control Panel or simply delete its Program folder.

Prevent has been developed by TWC Forum member, Ritesh Kawadkar

Note: Since the application disables the Task Manager buttons and makes some system changes, some antivirus programs may identify it as malware. Rest assured that the program is clean and its a false positive.

Over Clock A Graphics Card

#BorN2HacKer__________________________________________________________________________Hi,, it is Possible to Over Clock A Graphics Card. . I'm having a Dell Inspiron 15R (N5010) Default config : Intel Core i5-480M (2.666.7 Mhz ~ 2.6 Ghz) Intel HM57 (IbexPeak-M DH) - MotherBoard RAM : (M471B5773CHS-CH9) 4GB (2x2Gb) - 533.1 Mhz ATI Mobility Radeon HD But I have Tweaked all most all the Hardware settings to current Config : Intel Core i5-480M ~ 2.6 Ghz -> Now Turbo boosted to 3.1 Ghz RAM : Samsung (M471B5773CHS-CH9) 4GB (2x2Gb) - 533.1 Mhz -> Reduces the Latency as much as possible with stability___________________________________

_And you wont blve it . . on the Default Config the Windows Assessment Score was 5.4 , , and After all the Tweakings its now 6.5 . .k .. so Here's wht i Did..___

_1.) First For the Graphics Card:Downloaded :1.) AMD Catalyst 12.2 Preview Driver(AMD Catalyst 12.2 Preview Driver download from Guru3D.com)

2.) RivaTuner, GPU-Z,(available at 3dguru.com)Install the AMD Catalyst 12.2 Preview Driver...Install the "RivaTuner" but don't open the programm.Now open the "GPU-Z" and watch the Device ID you have.Go to C:\Program Files\RivaTuner v2.24search the file RivaTuner.cfg and open with Notepad.search "[GPU_1002]". you will see ATI chipset numbers and IDs.For ATI Mobility Radeon HD4570 search RV710 and add the Device ID + h. something like this ( ,XXXXh)For ATI Mobility Radeon HD4650/HD4670 search RV730 and add the Device ID + h. something like this ( ,XXXXh)Now save the file on Desktop RivaTuner.cfgRemove the RivaTuner.cfg from the Rivatuner folder and then paste the new file from your Desktop to the RivaTuner folderLunch the Rivatuner.exeNow you can see you videocard in the windowClick on it and choose the videocard pictureNow click on "Enable low-lavel hardware overclocking"I recommend for ATI Mobility Radeon 4650 HD: Core clock=650MHz / Memory clock=796MHz for stability of your systemNow click on "Apply overclocking at Windows stratup"Click on "Restore clock frequencies after suspended mode"Click "Apply" then "Ok"Go to "GPU-Z" and watch your Core clock&Memory clock.ENJOY_________

_______________And for higher Performance ... Tweak the RAM timings :Downloaded :1.) CPUTweaker v 1.5(Tweakers.fr)Extract the CPUtweaker folder,,Open Cpu Tweakerand change the timings carefully...According to my RAM i gve these values :-> RAM Timmings I modified using CPU-Tweaker 1.5 (Dell Inspiron 15R N5010)trcd-r - 6trp - 5tras - 8Sub timmings Down :trcd-w -6trfc - 64trrd - 1Twtp - 13trtp -1tref - 2080TAll Precharge to Active - 6

All Precharge to Refresh -6

Precharge to Precharge D - 0Refresh to Refresh D - 64Trd - 6mch ODT Read Command - 0Dram ODT Write Command - 0Dram ODT Read Command - 0__________________________________After this click on Apply . . .NOTE: I 'm having one problem in this tht is,,, CPUTweaker is not setting my defined timings at window Startup.. i have to apply these time manually every time window starts up . . rest,,, my system is working absolutely fine..._
_______________________________________________________________________________

And the last Tweak,, I enabled Intel SpeedStep from the BIOS,, and Installed the Intel TurboBoost Driver.and then went to the advanced power Options and changed the 'Min Processor State' under the ' Processor Power Management' to 100% for Plugged In modeand changed the ' Max Processor State ' under the same menu to 99% to both Battery and Plugged In modes...
___xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_______________xxxxxxxxxxxxxxxxxxxxxxxxxxxxx________________That is it.... then my Windows Assignmet Score went up from 5.4 to a whooping 6.5 .
 .For further Benching I have used 4 Games to keep an eye on the Performance, Lagging, and FPS:# All games have been tested at Default Graphics Settings of the Games, , Only the Resolution was Max i.e 1366x768
Games Used _________________ Initial FPS ___________ Tweaked Settings 
FPSFEAR 3 _________________________78 _____________________126
NFS Hot Pursuit 2011 _________________58 ______________________93
SSF4 AE____________________________ 65 ______________ _______96B
attle Field 3 (2011) ___________________39______________________ 69
So.. Iguess... changing the Graphics options for individual games will even give a much more high FPS . . 

16-Year-Old Teenager arrested for World's biggest cyber attack ever

16-Year-Old Teenager has been arrested over his alleged involvement in the World's biggest largest DDoS attacks against the Dutch anti-spam group Spamhaus.

The teenager, whose name is unknown at this point, was arrested by British police in April, but details of his arrest were just leaked to the British press on Thursday.

22 years-old Chartered Accountant student hacks into Celebrities E-taxation Accounts

Last week a 21-year-old chartered accountant student from Hyderabad was arrested for hacking into E-taxation Account of Industrialist Anil Ambani.

During the probe Mumbai Police’s crime branch has emerged that Anil Ambani's account was also fraudulently accessed from Noida.

After investigation, Police were able to track another CA student who not only accessed Ambani's account, but also of popular cricketers and film stars including Sachin Tendulkar, MS Dhoni, Shah Rukh Khan and Salman Khan.

Custom Voice Message at Startup

Hey guys today we will learn how to make your computer greet you on every start up,
Follow the below steps and boom, you are done.

Click on Start.

Navigate to All Programs, Accessories and Notepad.
Copy and paste the exact code given below.

Password Protect Any Folder Without Any Software

I (HackerzTAG) will show you interesting and usefull trick to password protect folder without using any software using batch file programming. This trick will work on all windows platform (Win XP, Win 7). Follow below tutorial to learn this trick.
 
How To Lock Folder ?

27 Cloned PHP Scripts for Developing Community Based Social Networking Websites like Facebook and Orkut

Solutions for creating powerful social networking websites like Facebook, Orkut, MySpace and Twitter. Learn about free and premium PHP software's and scripts that will help you to design your dream communities.
Below you will find 95 % resources on PHP and the rest 5 % resources are on Microsoft's .net.
We are living in the age of social networking websites like Facebook, Twitter and Orkut. At present, almost the majority of the world's population is using the service provided by these social networking websites for inter-connecting and communicating with their dear and near ones. The beauty of these so-called social networking websites is multi-face: as these services are used for networking with friends, promoting business, viral marketing as well as for dating. In fact, it has almost put an end to the classic dating sites.
Day by day the services provided by some of the giant social networking is growing at the speed of light, as they are constantly updating their websites with innovative features. Thus, there is virtually no limitation to the utility of social services. In the recent past, the world have seen how from the President of the United State of American to a peon all are using Facebook and twitter for promoting themselves.

10 sites offering free Linux courses online

See the list of the top free online Linux courses

Free online Linux courses, whether affiliated with universities or not, are generally intended for self-study and aren't offered for academic credit. Some material is offered through the schools' OpenCourseWare (OCW) projects.
 
Most Linux course materials include PDF, video and screenshots. Though content is usually directed toward first time users of Linux systems, the IBM and the University of California at Davis' offerings cater to intermediate users. Students may need to have access to their own computers running Linux in order to complete some lessons.
Free online Linux course list

Easy to design three-dimensional models Google SketchUp 8.0.16846

Google SketchUp model in three-dimensional design software to learn better and are for beginners and apprentices. When you enter the program, the first step would be Karytan format. Templates include architectural modeling, earth, engineering, product design and woodworking, architectural plans, or start teaching is modeling. Google SketchUp is a simple and accessible interface of the software is the best to become a model.

How To Remove Google Malware Warning From Our Blogger or Website

Friends, Now i am sharing a valuable post to remove suspicious link and content from our blogger/ Website. My blogger also affected with some links, because Google shows my Blogger is harmful. I cant recognize, what problem affected in my site. I also search on Google Webmasters Tool. But it not shows any warning. Only Google Chrome shows some warning. Because of these reasons my website ranking decease every day. After some days I got a website to find and reveal what problem affected on my site. Now i share how to remove malware content or link from our blogger . Follow this post and enjoy with HackerzTAG